Steps in Creating a LAN Network

Sumber: https://pghc.uma.ac.id/2022/03/langkah-langkah-dalam-membuat-jaringan-lan/

In this article I will develop how to create a LAN (local Area Network) network while simultaneously configuring the designed design. For those who don’t know what a LAN is, it is a privately owned network that has a range that is not too large. There is a LAN network itself called a wireless LAN, there is also a wired LAN. You can also play games offline when connected between personal computers with each other without the need for an internet connection, so it’s more fun to play games like Counter Strike. just read carefully to generate a LAN network below.

• Creating a wired LAN can use this way:
  • Prepare the senses and materials, namely:
  • 1. RJ45 = to be installed in a UTP cable and to a LAN card or onboard
    2. UTP = a cable that will be installed RJ45, as well as useful for connecting between personal computers.
    3. HUB/Switch = to combine two Personal Computers or even more on a network.
    4. Personal computer = make the test successful or fail.
  • Install the cable:
    Take the cable that already has RJ45 and the wiring must be straight. If you have plugged one end into the Lan Card or onboard, the other to the HUB / switch, as well as other personal computers. Make sure in step 2 there is no error because it will cause the LAN network to fail miserably.
  • IP Settings:
    1. Open Control Panel.
    2. Click Network and Internet
    3. Click Network and Sharing Center
    4. Click Change Adapter Settings.
    5. Right-click Local Area Connection.
    6. Click Properties.
    7. Click Internet Protocol Version 4 (TCP/IPv4), click Properties.
  • IP settings as below:
    If you have IP settings then check by opening cmd, using the start->run->cmd command then there will be a black dialog box and you write ping (destination IP). So for example your model is 192.168.1.1 then you must write ping 192.168.1.2 and vice versa.
    create Wireless LAN can use this way:
    1. Open the control panel.
    2. Open Network and Internet, then open network and sharing center.
    3. Click set up a new connection or network.
    4. Click set up a wireless ad hoc network, then click next.
    5. Click next again, then type the network name and password if necessary.
    6. Then live IP settings similar to how to form a wired LAN network above.
    7. If you have IP settings then check the connection using cmd.
  • When the LAN network is complete, you can play games with your friends or even a village, but not all of them because the scope is also limited and requires a cable that is not too short, of course you need more ports to develop. If you want one village to be connected, all by forming a network LAN.
  • So that’s step by step how to create a LAN network (local area network) with a cable as well as wireless. Thank you for visiting, don’t give up and happy learning. Hopefully it is useful and your practice or work can run smoothly without significant obstacles. So many ways to generate a LAN network.